Setseal
22

Water based paraffin dispersion concrete curing compound (Formerly known as Setcrete 22)
 
Advantages
  • Helps achieving concrete desired strengths.
  • Minimizes potential surface cracking and shrinkage.
  • Promotes a harder dust free surface.
  • Single component.
  • Can be spray applied to reduce labor cost.
Description

Setseal 22 is a water based curing compound formulated from selected emulsified paraffin to form a low viscosity wax emulsion.

Setseal 22 is supplied as clear and white pigmented colours, the clear colour is a white liquid, which forms a wet white film when applied to concrete surfaces, this dries to form a transparent film. The white pigment colour is a white milky liquid, which forms a white film after drying and reflect 60 – 80% of the sunlight providing the recommended coverage has been maintained.

The two grades are designed to retain sufficient moisture in the concrete to ensure full hydration of the cement, which is essential for optimum strength development.

Packaging

Setseal 22 is available in 25 litre pails and 200 litre drums.

Coverage

The recommended coverage rate is 2.5 - 3.5 m²/litre.

Storage

Store in a dry area out of direct sunlight between 5°C and 35°C.

Shelf Life

Setseal 22 has a shelf life of 12 months from date of manufacture if stored in proper conditions in un-opened drums.

Standards

  • Setseal 22 is suitable for use in structures that will be in contact with potable water when tested in accordance with BS 6920.

Applications

Setseal 22 is used mainly for newly cast concrete and cementitious surfaces to retain sufficient moisture to ensure full hydration of the cement. Typical application areas include:

  • Runways and roads.
  • Roof decks.
  • Retaining walls.
  • Irrigation canals.
  • Concrete floors.
  • Columns and underground foundations.


Download file

MS
Setseal 22
TDS
Setseal 22
MSDS
Setseal 22


Related products





Connect with Don Construction Products


  Complaints Record Form

  Customer Satisfaction

Name *
Email *
Phone
Address
Subject
Request  
Security Code *

DCP Lebanon 

Headquarters, Showroom & Sales
Click to find on map
Port, Jamarek Street (Face Ferroli), Rbeiz Bldg.
Beirut, Lebanon 
Tel.: +961 1 444 562
Fax: +961 1 444 563

E-mail: info.lebanon@dcp-int.com
Website: www.dcp-int.in/lb

Authorized Agent of the South Beirut Suburb

Technical Engineering Material (T.E.M.) 
Old Airport Road;
Haret Horeik Entrance, Rokon Al-Sanawbar Bldg.
Beirut, Lebanon 
Tel.: +961 3 645 305
Fax: +961 1 842 694

E-mail: tem-kha@mail.com
Website: www.dcp-int.in/lb