Setseal
AW

Multipurpose acrylic based concrete curing compound (Formerly known as Setcrete AW)
 
Advantages
  • Recoatable.
  • Non-degradable, single component.
  • Enhanced concrete durability.
  • Increase the surface abrasion.
  • UV resistance.
  • Helps achieve concrete desired strengths.
  • Minimizes potential surface cracking and shrinkage.
  • Promotes a harder dust free surface.
  • Can be spray applied to reduce labor cost.
  • Non toxic.
Description

Setseal AW is a single component designed to impregnate concrete surfaces combining the benefits of a curing aid and hardener.

Setseal AW is designed to overcome drawbacks of many commonly used curing membranes that tend to provide a limited service life following the curing period of new concrete. It has good abrasion resistance and is compatible with several types of coatings.

Packaging

Setseal AW is available in 25 litre pails and 200 litre drums.

Coverage

The recommended coverage rate is 3 - 5 m²/litre.

Storage

Store in a dry area out of direct sunlight between 5°C and 35°C.

Shelf Life

Setseal AW has a shelf life of 12 months from date of manufacture if stored in proper conditions in un-opened drums.

Applications

Setseal AW is mainly used for newly cast concrete and cementitious surfaces that contain GGBFS, PFA, microsilica, dry shake hardeners or limestone to retain sufficient moisture to ensure full hydration of the cement.

Typical application areas include:

  • High rise construction to eliminate water curing.
  • Runways and roads.
  • Roof decks.
  • Retaining walls.
  • Irrigation canals.
  • General floor slab and columns.


Download file




Connect with Don Construction Products


  Complaints Record Form

  Customer Satisfaction

Name *
Email *
Phone
Address
Subject
Request  
Security Code *

DCP Saudi Co.

Riyadh Office
Click to find on map
Exit 9, Al Izdehar, Intersection of Imam Saud Road with Othman Bin Affan Road;
Beside ACDelco Petrol Station;
P.O. Box 121116 Riyadh 11699;
Tel.: +966 11 211 2350, +966 11 461 2003
Fax.: +966 11 211 2350, Ext. 105

Riyadh Factory
Click to find on map

Exit 18, Sulay industrial area, Istanbul road;

Riyadh, Saudi Arabia


Jeddah Office
Click to find on map
Al Henaki Business Center, Tower C, 4th floor;
Prince Sultan Street, Al Nahda District;
P.O. Box 4305, Jeddah 21491;
Tel.: +966 12 234 4221
Fax: +966 12 234 4282

Email: info.saudi@dcp-int.com