Highly concentrated water based paraffin dispersion concrete curing compound
  • Helps achieving concrete desired strengths.
  • Minimizes potential surface cracking and shrinkage.
  • Promotes a harder dust free surface.
  • Single component.
  • Can be spray applied to reduce labor cost.

Setseal CR300 is a high solids water based wax emulsion curing compound formulated from selected materials to form a low viscosity curing compound with outstanding moisture retention characteristics.

Setseal CR300 is supplied as clear and white pigmented colours, the clear colour is a white liquid, which forms a wet white film when applied to concrete surfaces, this dries to form a transparent film. The white pigment colour is a white milky liquid, which forms a white film after drying and reflect 65 - 80% of the sunlight providing the recommended coverage has been maintained.


Setseal CR300 is available in 25 litre pails and 200 litre drums.


The recommended coverage rate is 4 - 5 m²/litre.


Store in a dry area out of direct sunlight between 5°C and 35°C.

Shelf Life

Setseal CR300 has a shelf life of 12 months from date of manufacture for the clear version, and 9 months for the pigmented, if stored in proper conditions in un-opened drums.


Setseal CR300 complies with the following standards:

  • CRD-C 300-90 Specifications for Membrane-Forming Compounds for Curing Concrete.
  • AASHTO M148 and ASTM C309, Type I & II, Class A.
  • Setseal CR300 is suitable for use in contact with potable water when tested in accordance to BS 6920.


Setseal CR300 is used mainly for newly cast concrete and cementitious surfaces to retain sufficient moisture to ensure full hydration of the cement. Typical application areas include:
  • Runways and roads.
  • Roof decks.
  • Retaining walls.
  • Irrigation canals.
  • Concrete floors.
  • Concrete tanks.

Download file

Connect with Don Construction Products

  Complaints Record Form

  Customer Satisfaction

Name *
Email *
Security Code *

DCP Saudi Co.

Riyadh Office
Click to find on map
Exit 9, Al Izdehar, Intersection of Imam Saud Road with Othman Bin Affan Road;
Beside ACDelco Petrol Station;
P.O. Box 121116 Riyadh 11699;
Tel.: +966 11 211 2350, +966 11 461 2003
Fax.: +966 11 211 2350, Ext. 105

Riyadh Factory
Click to find on map

Exit 18, Sulay industrial area, Istanbul road;

Riyadh, Saudi Arabia

Jeddah Office
Click to find on map
Al Henaki Business Center, Tower C, 4th floor;
Prince Sultan Street, Al Nahda District;
P.O. Box 4305, Jeddah 21491;
Tel.: +966 12 234 4221
Fax: +966 12 234 4282